Below are links to two videos I took this past Sunday when I had a
chance to hook up the TT-4 and TT-76 to the ITTY 100wpm channel for an
extended time.  I have really only lubricated them (very, very well) and
adjusted the motor speeds a little.  They haven't needed any other works
as far as I know now.  I need to replace the ribbon on the TT-4.  The
ribbon feed was not working properly and I did discover that the feeler
arm was binding in the ribbon holder.  I ended up trying to bend it out
a bit and that solved the problem.  If the holder seems "off" a bit
compared to the other one then that is why.  It is the only "easy" way I
could think of to solve that problem.


73

Kevin

W5TTY

https://www.youtube.com/watch?v=SHK13Ahtp3A


https://www.youtube.com/watch?v=nENB1JgVfoE



______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys@mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to kn4ucl@gmail.com