Bill,

The 8th bit is not needed by the printer to print correctly. The machine will punch it but if you look at the code bars there is no connection to the carriage. The codebars are labeled on the right side next to all the codebar springs. You might have to clean the label bar.

Good luck.

Wayne

KB1FDW

On 06/26/2022 4:10 PM B Degnan via GreenKeys <[email protected]> wrote:

Hi. I was wondering what might cause pin/channel 8 to always go inverse of what was typed at the keyboard. Results in the wrong character to print. For example, if the ascii character was --34-6-- , the character printed would be --34-6-8.

If the character was --34-6-8 , the character printed would be --34-6--

Thanks

Bill Degna
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]