Try one of these if you can find one.
It's a RTTY modem. It will take audio from iTTY and produce the current loop signals.

https://www.w6iwi.org/rtty/tu170/

-Steve

On Thursday, March 17, 2022, 08:23:26 PM EDT, Matthew Wagner <[email protected]> wrote:


Hi all,

I'm relatively new here, but I've been working on my first restoration (an M19) and I'm pretty close to having it done. The only thing left to test out is the actual Tx/Rx loop circuits. 

I'm not entirely sure where to start out looking for something to interface with the 60mA loop. Preferably RS232 or USB to make things easier. I want to eventually get it up on ITTY once everything's working properly. 

If anyone has some pointers on some gear to start looking for, I'd appreciate some direction. 

Much Appreciated,
Matt Wagner
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]