This looks like what you need:ANSI X3.19, "Eleven-Sixteenths Inch Perforated Paper Tape for Information Interchange".https://www.semanticscholar.org/paper/Eleven-sixteenths-inch-perforated-paper-tape-Gorn/3188b695307ba4e749993b344895f2175706c6e6/figure/0There's a picture in MIL-STD-188-100 (attached) that shows three tape widths side-by-side, including dimensions for the holes and not just the tape.(These are all the "Teletype-style" hole positioning. Linotype 6-level tape has the holes offset from the center track).On Tue, Nov 30, 2021 at 8:39 PM Nick England <navy.radio@gmail.com> wrote:Does anyone have a drawing showing the proper spacing for holes in 5-level (11/16") tape - distance from edge, distance between holes, hole diameter, etc.Why? because I am trying to get a local machinists hobby group interested in making a 5-level punch block for a 6-level BRPE that I have...Yes, I will measure things but it would be nice to see an official drawing.Thanks______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys@mailman.qth.net
>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hughpyle@gmail.com