Tom,

  Try typing all letters not figs.
  While it is typing watch the platen closely to see if it is drifting up and down.
Looks like maybe it has some play in it.

-Steve

On Friday, November 19, 2021, 01:22:01 PM EST, Tom Hunter <[email protected]> wrote:


For those of you who did not like my foxes, here is my model 15 printing ITTY news a minute after I ran the foxes. It shows the same uneven baseline problem.

Jerry, that jig sounds great - but I do not have one.

The 15 used to look great. All this trouble started when I replaced the broken "S" pullbar.


Tom   N3CRK
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]