You need a couple of 4-40 shoulder screws p/n 151223
page 40 of
BSP 573-116-800 iss 3
At least it's for the mark III keyboard. page 12 supposedly also shows that for a mark II keyboard, but I couldn't find it.
My memory says they're the same.
--- ---- The above comments or recommendations are SWAG. Use at your own risk. John, W9DDD
Thank you everyone for your comments.
WB2TTY has kindly offered to send me a real model 15 Draw band. So that problem is solved.
My next problem is a 28 KSR in which someone has disconnected the space bar from its levers. I can not find a blowup in a parts manual. It looks like each side was attached with a small bolt. Does anyone know the size and thread of those bolts?
This machine was built up from assorted asemblies. All the other keys work and the KSR prints fine.
Once that one is done, I will be building up another KSR from case, keyboard and typing unit. I have 60 speed gears and other odds and ends ordered from Paul Cembura for that one.
Thank you W8FIX for all the model 28 parts.
Tom N3CRK HH12177
______________________________________________________________ GreenKeys mailing list Home: http://mailman.qth.net/mailman/listinfo/greenkeys Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/ 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.htmlThis list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]