[GreenKeys] Printer won't align model 15

[John Lawson]

Is it possible you have “mark” and “space” reversed?  Wrong signal polarity?
That will cause garbled print as you are describing…

Cheers
John KB6SCO
Carson City
From: greenkeys-bounces at mailman.qth.net <greenkeys-bounces at mailman.qth.net> On Behalf Of Windows XD
Sent: Sunday, September 21, 2025 3:13 PM
To: greenkeys at mailman.qth.net
Subject: [GreenKeys] Printer won't align model 15

Dear all, My printer won't seem to align itself to the datastream it is being sent no matter how I adjust the speed adjuster on the side, what do you recommend I do to trouble shoot it? It prints perfectly fine when it is printing to itself.
NkdkJdXPPEBannerStart


NkdkJdXPPEBannerEnd
Dear all,

My printer won't seem to align itself to the datastream it is being sent no matter how I adjust the speed adjuster on the side, what do you recommend I do to trouble shoot it? It prints perfectly fine when it is printing to itself. I currently have it hooked to an Arduino which is sending out RYRYRY in Baudot. To eliminate the question of is it the code, it is currently has a 22 second start delay, 22 second delay per bit, and a 31 second ending delay. That is currently being run through a solid state relay capable of switching at that speed. I know it can do this since it works with the keyboard when moving locally. Furthermore, the letters it prints are always the same depending on the speed setting, (although wrong) so it's not like there's a mechanical issue.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20250921/919cb288/attachment.html>