[GreenKeys] Model 15 74359 draw strap.

[John Spigel]

Check the photo here at bottom of page:

https://w1an.com/photos/equipment

Use 1/4" braided dacron line with core slipped out so it will lay flat. 
Use solder iron to seal the ends at the stak-ons.(For #10 wire).  Do not 
exceed 9.5" eye to eye. That keeps the wrap to near 100%. Maybe 9.3" 
would be safer.

Work great. I have done on several machines.
73, John W1AN

On 18-Oct-25 20:17, Peter Leonard wrote:
> Hi,
> 
> I have a Model 15 with a broken "Draw Strap part 74359"
> 
> Any suggestions for a replacement or suitable fabric for repair.
> 
> Kind regards,
> 
> 73
> 
> Pete VK5XP
> 
> 
> 
> 
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w1an.dxusa at gmail.com