[GreenKeys] Another non-standard RTTY terminal

[Chris Elmquist]

On Sunday (11/23/2025 at 11:30AM -0800), William Wuttke wrote:
> Hi Chris,
> As Harold said. We're looking forward to you getting the heavy metal on the
> air. You'll need some sort of Loop to RS-232 converter for the M28. I have
> an M33 that I have used with the ST-8000A with an arduino-based
> ASCII-Baudot/110-45.5baud converter that resides inside the M33.

Yes-- Thanks Bill.  I have various loop converters to both RS232 and
TTL so should be set there.

Most of the work here will be on the radio side--  I have evolved
the HF station for mostly software-based modes and also have to use
separate receive antennas (various loops) as the noise floor is otherwise
intolerable here.  So, I am working on an RF sensed T/R switch that will
allow receiving on a loop but TX on any of my various vertical and wire
antennas and then I can dedicate a TS-440, IC-7300 or some other to RTTY.

Fortunately, I just retired so I _think_ I will have more time for this
stuff :-)

73, Chris NØJCF

-- 
Chris Elmquist