[GreenKeys] M15 Auto line Feed

[hwhall@aol.com]

Does this happen when the keyboard is the input source or when being driven by an external inputs? Or both?
Is it absolutely every character or are there some possible letters that don't do it?
Have you tried hand turning the motor & watching the mechanism go through a cycle or two?

Wayne
WB4OGM

On Tuesday, June 3, 2025 at 06:42:04 AM MDT, john WA4KWK <wa4kwk at gmail.com> wrote: 

Disassembled my M15 for a short move and reassembled no problem. Mysterious issue.... I have a line feed after every character printed. No carriage return... Just a line feed. The text prints perfectly just has a line feed after every character. Sure does use a lot of paper! Any ideas where to start looking?

Thanks,
John

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hwhall at compuserve.com