[GreenKeys] M15 Auto line Feed ​

[John, W9DDD]

I suspect something in the function lever area has gotten out of place.


I'd look to the backside of this area where the tails of the function 
levers interact with other links or levers.




On 6/3/2025 10:26 AM, john WA4KWK wrote:
> Disassembled my M15 for a short move and reassembled no problem. 
> Mysterious issue.... I have a line feed after every character printed. 
> No carriage return... Just a line feed. The text prints perfectly just 
> has a line feed after every character. Sure does use a lot of paper! 
> Any ideas where to start looking?
>
> Thanks,
> John
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org

-- 
---
----
The above comments or recommendations are SWAG. Use at your own risk.

John, W9DDD