[GreenKeys] Model 33 Issue

[Aidan Riley]

Hi all,

I was having issues with the line feed of my Model 33, and was wondering if
anyone had a solution or had seen something similar. When I send a line
feed character, it sometimes will not fully feed the line, as if the
sprocket wasn't pushed down far enough or with enough force. I adjusted the
spring to try to fix this but did not have luck. The paper is not slipping
at all - the platen is not fully turning. I did also note that the platen
turns plenty easily by hand.

73,
Aidan W9POG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20250730/27e80b70/attachment.html>