[GreenKeys] Ribbon/Cartridge for UGC-136

[john at toebes.com]

It is making progress.  There is one minor variation that will have to be done in order to 3D print it – instead of the pins that push into the bottom part of the cartridge, it will require using small screws to hold the top on in the same place.  Feel free to check the progress at:

 

https://cad.onshape.com/documents/cdc3f96f11393c190fe11103/w/d390734d64166e3974a43552/e/5db85b6313ad37598d4c25e0?renderMode=0 <https://cad.onshape.com/documents/cdc3f96f11393c190fe11103/w/d390734d64166e3974a43552/e/5db85b6313ad37598d4c25e0?renderMode=0&uiState=6886b418ec6d4a3754b2f8b0> &uiState=6886b418ec6d4a3754b2f8b0

 

 

*	John Toebes
*	Science Olympiad Codebusters – Event Supervisor -  <https://www.soinc.org/codebusters-c> National and  <https://ncscienceolympiad.ncsu.edu/resources/high-school/codebusters/> North Carolina 
*	919-622-2041

 

From: greenkeys-bounces at mailman.qth.net <greenkeys-bounces at mailman.qth.net> On Behalf Of Nick England
Sent: Tuesday, July 22, 2025 3:49 PM
To: Greenkeys <greenkeys at mailman.qth.net>
Subject: Re: [GreenKeys] Ribbon/Cartridge for UGC-136

 

Greenkeyer John Toebes picked up a used cartridge from me and is going to 3D model it so they can be printed.




Nick England K4NYW
www.navy-radio.com <http://www.navy-radio.com> 

 

 

On Wed, Jul 16, 2025 at 11:04 AM Nick England <navy.radio at gmail.com <mailto:navy.radio at gmail.com> > wrote:

https://www.navy-radio.com/tty/ugc136/ribbon.htm

 

Greenkeyers Ron and Michael have found these from Germany.

https://www.ebay.com/itm/352927962791

 

They look right to me. 

I have made an offer and will see what the response is.




Nick England K4NYW
www.navy-radio.com <http://www.navy-radio.com> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20250727/7426ecad/attachment.html>