[GreenKeys] M-15... Auto Line Feed After every printed character

[E.]

Woot — glad you were able to find the issue ^^ !!!  Now if it was a modern smartphone 🥴 …..


> On Jul 27, 2025, at 3:46 PM, hwhall at aol.com <hwhall at compuserve.com> wrote:
> 
> Yaayyy!  Glad that it's all good now.  :-)
> 
> Wayne
> WB4OGM
> 
> On Sunday, July 27, 2025 at 02:40:32 PM MDT, john WA4KWK <wa4kwk at gmail.com> wrote: 
> 
> SUCCESS!!!! The 15 is typing as it should. To recap the LF push bar was not FULLY down in the idle position. It moved up and down so I thought all was okay. The two wires going to the magnets were jammed up into the unit preventing the LF push bar from fully going down in the idle position. So the function bail was just barely  grabbing the LF push bar on each cycle. Moved the two wires and all is good. 
> Thanks to everyone that provided input.... Especially Wane WB4OGM.
> 
> John
> WA4KWK