[GreenKeys] M-15... Auto Line Feed After every printed character

[hwhall@aol.com]

If this is still a mystery tomorrow, I'll see if I can examine a M15 & take some pics & notes on the real-world push bar location & spring (if there).

Wayne
WB4OGM

On Tuesday, July 22, 2025 at 06:14:14 PM MDT, -E <hanyou at xsmail.com> wrote: 

I scanned the M15 diagram and I’m not seeing one spring right off hand either — I might just be missing it… but without tearing apart my M19, there are two springs that immediately see (videos attached… hopefully they'll go through).  One I point out with a pen and the other — again, not immediately obvious in the diagram that I looked at, is in the left-center frame-portion of the vertical video.  For some reason I remember that the one that went missing on mine was next to the platen, but I could be wrong.  A screenshot of that portion next to the patten is also attached.

Good luck!



> On Jul 22, 2025, at 5:55 PM, john WA4KWK <wa4kwk at gmail.com> wrote:
> 
> I can not find the 'Line Feed Push Bar Spring' anywhere. Not on the drawing or unit. Where is it located please?
> 
> John
> 
> WA4KWK
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hwhall at compuserve.com