[GreenKeys] Darker Printing? Model 15 Restoration

[John Spigel]

On a M15 there is an adjustment screw at the right end of the rail the 
basket rides to adjust tension on a large spring which I believe 
controls impact of the pallets. Might be used also to help when running 
two or three copy paper. Just guessing, but most likely you need a new 
ribbon.

73, John W1AN

On 04-Apr-25 21:47, hwhall--- via GreenKeys wrote:
> Usually light printing is a ribbon issue (dried out, etc.).  There's a platen adjustment to "center" the platen face with the typbar's pallets but that problem presents as characters being light at the top or bottom half of the characters.
> 
> It may be possible the typebars aren't whacking the ribbon & platen hard enough but there's no adjustment for that, I think.  The typebars may not be moving freely enough? But definitely check the ribbon condition.
> 
> Wayne
> 
> On Friday, April 4, 2025 at 07:36:35 PM MDT, bambi.page <bambi.page at gmail.com> wrote:
> 
> Moving the platen(?), or keybasket(?) or if there is a printing darkness setting
> Anything that is possible to make the characters more legible will help
> Thanks
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w1an.dxusa at gmail.com