[GreenKeys] User manual for ME-9G/U ????

[Richard Knoppow]

On 9/27/2024 5:14 PM, scottjohnson1 at cox.net wrote:
> It’s pretty straight forward, on volts you have a 1K /volt side and a 
> 20k ohm /volt, positive lead goes in whatever range you want, negative 
> lead goes to jack above and left of the meter. Everything else is 
> marked.  Make sure the knob that you replace the Rx scale switch is 
> indexed properly.  It needs a D cell and three 4.5-volt batteries in 
> series for ohms, the three 4.5V batteries can be replaced by 9 AAs in 
> series.  To use the 5 kV multiplier at the top, connect a jumper to the 
> 2.5V jack, the high voltage input is a banana, but make sure you use HV 
> lead wire of you are using it.  Most of the condensed instructions are 
> inside the lid, which also has the leads and accessories, I take it that 
> it was missing?  Full nomenclature is TS-352.  I believe it is the 
> predecessor to the PSM-6 that all GIs know and love.
> 
> Scott W7SVJ
> 
> *From:*greenkeys-bounces at mailman.qth.net <greenkeys- 
> bounces at mailman.qth.net> *On Behalf Of *steve bennett via GreenKeys
> *Sent:* Friday, September 27, 2024 12:36
> *To:* GREENKEYS BULLETIN BOARD <greenkeys at mailman.qth.net>
> *Subject:* [GreenKeys] User manual for ME-9G/U ????
> 
> Can anyone tell me how to use this meter?
> 
> Just picked it up today.
> 
> Thanks,
> 
> -Steve


-- 
Richard Knoppow
Los Angeles
WB6KBL
SKCC 19998
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TM 11-5527 24-Oct-56 NJ7P.pdf
Type: application/pdf
Size: 2673105 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20240927/0763ba76/attachment-0001.pdf>