[GreenKeys] Model 19 Wiring for 2 Line Connection

[Duncan Brown]

Thanks for sharing, John!

Duncan
K2OEQ


On 23-Feb-24 13:49, John Spigel wrote:
> I've just finished my Model 19 wiring for selection of either of two 
> lines from the tables front mounted switch. This makes it easy to 
> select which TU you are using and requiring only a single 2 wire 
> cable. This took a bit of pain marking factory drawings with colored 
> highlighters, ring tracing the wires, dropping screws, working off the 
> floor, etc. I hope the simplified drawing I made is useful. Please 
> copy and save for reference.
> 73, John W1AN
>
> https://w1an.com/files/Model%2019%20Table%20with%20Two%20Line%20Selection.pdf 
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: 
>>>> https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: 
>>>> http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: 
>>>> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: 
>>>> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to duncanancy at earthlink.net