[GreenKeys] 28 mini KSR (ugc-20/ugc-77) speed

John, W9DDD w9ddd at tapr.org
Tue Sep 26 15:27:30 EDT 2023


Eugene,

This one is designed to be shifted while running.

I just reviewed the lub instructions (573-116-704TC) and can't see what 
I might have missed.

---
----
You said "tomorrow" yesterday.

The above comments or recommendations are SWAG. Use at your own risk.
John, W9DDD

On 9/26/2023 2:21 PM, W2HX wrote:
>
> Admittedly, I haven’t followed this thread very carefully. And maybe 
> this information isn’t pertinent but, on my M28KSR with the 3 speed 
> gearbox, I cannot switch speeds while the motor is running. I have to 
> stop the motor and just before it comes to a halt I can change the 
> gear lever. Actually, its easier just to wait for it to stop and move 
> the motor by hand as I change the gears. Again, this could be totally 
> irrelevant to this discussion but I thought I’d mention it.
>
> 73 Eugene W2HX
> Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx/videos
>
> *From:*greenkeys-bounces at mailman.qth.net 
> <greenkeys-bounces at mailman.qth.net> *On Behalf Of *John, W9DDD
> *Sent:* Tuesday, September 26, 2023 3:08 PM
> *To:* greenkeys at mailman.qth.net
> *Subject:* Re: [GreenKeys] 28 mini KSR (ugc-20/ugc-77) speed
>
> Well I stood on my head and squinted and managed to find a position 
> where I can get a screwdriver onto the second set screw (on the side). 
> Now have both set screws as tight as I can get them.
>
> It seems to me that it's taking too much force even if I grab the rod 
> at the back end and wrestle it there instead at the knob.  Is it 
> possible I've missed something in the lubrication process?
>
> ---
> ----
> You said "tomorrow" yesterday.
> The above comments or recommendations are SWAG. Use at your own risk.
> John, W9DDD
>
> On 9/26/2023 11:44 AM, John, W9DDD wrote:
>
>     Well this made me take the cover off of mine.  I think my problem
>     is that I can't get enough bite on the new knob to keep it from
>     slipping.  With the cover off and access internally I can shift
>     all 3 speeds.  The original knob would have a screw going through
>     the hole in the shaft so no slippage problem with it.
>
>     ---
>
>     ----
>
>     You said "tomorrow" yesterday.
>
>     The above comments or recommendations are SWAG. Use at your own risk.
>
>     John, W9DDD
>
>     On 9/26/2023 11:03 AM, Nick England wrote:
>
>         Here's a video of shifting gears on a 28 Compact - there are
>         very distinct sounds while running and shifting between the
>         three speeds. Are you really shifting to the 45 baud gears?
>
>         https://www.navy-radio.com/tty/28-compact-gearchange.MOV
>
>         Nick England K4NYW
>         www.navy-radio.com <http://www.navy-radio.com>
>
>         On Sat, Sep 23, 2023 at 9:16 PM Nick England
>         <navy.radio at gmail.com <mailto:navy.radio at gmail.com>> wrote:
>
>             There are 3 separate pairs of gears that get selected by
>             the lever. So somehow you aren’t really selecting the 45.5
>             pair. There is no adjusting the speed except by selecting
>             one of the pairs. I’ll take some photos.
>
>             Nick
>
>             On Sat, Sep 23, 2023 at 8:15 PM Jeffrey Golas
>             <jeffg at junknet.net <mailto:jeffg at junknet.net>> wrote:
>
>                 Hey all, figured Id ask here too. At the ship we have
>                 this ugc-77 (low level 28 mini) that has a selectable
>                 gearbox (45.5/50/75 baud). Despite putting it on far
>                 counter-clockwise position, its stuck at 50 baud and
>                 not 45.5. Does anyone know if I can adjust it further
>                 to get it back to 45.5?
>
>                 I guess I should RTFM too.
>
>                 Jeff KC3GJX
>                 ______________________________________________________________
>                 GreenKeys mailing list
>                 Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>                 Help: http://mailman.qth.net/mmfaq.htm
>                 Post: mailto:GreenKeys at mailman.qth.net
>                 <mailto:GreenKeys at mailman.qth.net>
>
>                 >>> Jordan Spencer Cunningham's GreenKeys Search Tool:
>                 https://teletype.net/gksearch
>                 <https://teletype.net/gksearch>
>                 >>> 2002-to-present greenkeys archive:
>                 http://mailman.qth.net/pipermail/greenkeys/
>                 <http://mailman.qth.net/pipermail/greenkeys/>
>                 >>> 1998-to-2001 greenkeys archive:
>                 http://mailman.qth.net/archive/greenkeys/greenkeys.html
>                 >>> Randy Guttery's 2001-to-2009 GreenKeys Search
>                 Tool: http://comcents.com/tty/greenkeyssearch.html
>                 <http://comcents.com/tty/greenkeyssearch.html>
>
>                 This list hosted by: http://www.qsl.net
>                 Please help support this email list:
>                 http://www.qsl.net/donate.html
>                 <http://www.qsl.net/donate.html>
>                 Message delivered to navy.radio at gmail.com
>                 <mailto:navy.radio at gmail.com>
>
>
>
>
>         ______________________________________________________________
>
>         GreenKeys mailing list
>
>         Home:http://mailman.qth.net/mailman/listinfo/greenkeys
>
>         Help:http://mailman.qth.net/mmfaq.htm
>
>         Post:mailto:GreenKeys at mailman.qth.net
>
>                     Jordan Spencer Cunningham's GreenKeys Search Tool:https://teletype.net/gksearch
>
>                     2002-to-present greenkeys archive:http://mailman.qth.net/pipermail/greenkeys/
>
>                     1998-to-2001 greenkeys archive:http://mailman.qth.net/archive/greenkeys/greenkeys.html
>
>                     Randy Guttery's 2001-to-2009 GreenKeys Search Tool:http://comcents.com/tty/greenkeyssearch.html
>
>         This list hosted by:http://www.qsl.net
>
>         Please help support this email list:http://www.qsl.net/donate.html
>
>         Message delivered tow9ddd at tapr.org <mailto:w9ddd at tapr.org>
>
>
>
>
>
>     ______________________________________________________________
>
>     GreenKeys mailing list
>
>     Home:http://mailman.qth.net/mailman/listinfo/greenkeys
>
>     Help:http://mailman.qth.net/mmfaq.htm
>
>     Post:mailto:GreenKeys at mailman.qth.net
>
>                 Jordan Spencer Cunningham's GreenKeys Search Tool:https://teletype.net/gksearch
>
>                 2002-to-present greenkeys archive:http://mailman.qth.net/pipermail/greenkeys/
>
>                 1998-to-2001 greenkeys archive:http://mailman.qth.net/archive/greenkeys/greenkeys.html
>
>                 Randy Guttery's 2001-to-2009 GreenKeys Search Tool:http://comcents.com/tty/greenkeyssearch.html
>
>     This list hosted by:http://www.qsl.net
>
>     Please help support this email list:http://www.qsl.net/donate.html
>
>     Message delivered tow9ddd at tapr.org <mailto:w9ddd at tapr.org>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230926/7b6ed236/attachment.html>


More information about the GreenKeys mailing list