[GreenKeys] For grabs: Rare M19, M28 KSRs, RO, Frieden Flexowriter

Sun Sep 17 14:42:34 EDT 2023

There are times when living the wrong side of the pond makes posts like 
these all the more frustrating!

Sadly shipping will kill this off for those of us in the UK :)

Good luck finding new homes for it all.

73

Sean

M1ECY

On 17/09/2023 19:25, Jordan Spencer Cunningham wrote:
> Hello GreenKeyers,
>
> When in the course of human events it becomes necessary for one man to 
> dissolve the emotional bands which have connected him with archaic 
> equipment he knows he will never gain the naturally occurring 
> felicitude derived from tinkering with said equipment, a decent 
> respect to the opinions of mankind requires that the equipment be 
> pawned off to some other poor sap.
>
> Gentlemen, lady(ies?): in the tranquil hills of Eagle Mountain, Utah 
> awaits equipment for your consideration and subsequent collection. I 
> am simply being realistic with myself and recognizing that I likely 
> won't be able to submit the proper care these machines deserve what 
> with the other machines to which I am devoted, and I also am running 
> low on space.
>
> Cost? I am at least looking to recoup the few hundred dollars in gas 
> it took to obtain this equipment and maybe a burger or two or a six 
> pack of Apple Beer, so most any offer will be considered, even if you 
> think it's low. People from GreenKeys get special consideration over 
> those who contact me through other means. More important than 
> recouping my investment is ensuring these go to a good place and will 
> be taken care of and preferably used. Indications of earnest desire 
> and aptitude to fully restore and operate these machines go a long way.
>
> None of these machines are in danger of the scrap yard, but this is a 
> first come, first served situation. If you're unsure of when you'd be 
> able to make a trip to Utah with a truck to take any of these home, 
> let me know your interest and your location. You never know when I 
> might be heading toward or near you sometime in the future where we 
> could meet halfway or make some other arrangement.
>
>  1. This is a quite rare Model 19 complete with table and Model 14
>     typing reperforator shelf, garbed in traditional Western Union
>     Green. I'm not sure whether I really want to pass this on or not,
>     but I don't think I will be able to do the array of machines
>     justice, so I'm at least putting it out there to see how serious
>     other people might be about it. Convince me you're going to
>     restore it to full glory and take proper care of it sooner than
>     I'll be able to get to it (it's going to be years for me), and I
>     might let it go. M19, M14 TD, and M14 RO typing reperforator
>     included. The 19 has a unique privacy window built onto the case.
>     The M14 shelf is missing its mounting screws currently, the typing
>     reperforator is missing its cover, and there are some missing
>     keycaps, but otherwise it all appears to be intact. Each of the
>     three have chipping/peeling crinkle paint.
>      1. Image of Table <https://teletype.net/imgs/m19_table_special.jpg>
>      2. Image of M19 <https://teletype.net/imgs/m19_special.jpg>
>      3. Image of M14 TR <https://teletype.net/imgs/m14ro_special.jpg>
>      4. Image of M14 TD <https://teletype.net/imgs/m14td_special.jpg>
>  2. Three Model 28 KSRs, and one 28 RO (no keyboard). I am definitely
>     ready to let at least two of these go; I'm leaning toward keeping
>     the RO and one of the KSRs, but if you can make a good case that
>     you'll take good care of them and put them to good use, I may be
>     convinced to also let go of one or both of these two.
>      1. Image 1 <https://teletype.net/imgs/m28ksr_1.jpg>
>      2. Image 2 <https://teletype.net/imgs/m28ksr_2.jpg>
>      3. Image 3 <https://teletype.net/imgs/m28ro_1.jpg>
>  3. A Frieden Flexowriter. Motor seems to be seized, but otherwise
>     appears to be complete and without having suffered any physical
>     trauma. I simply decided I need to focus on standard-encoding
>     machines (ITA2/USTTY/ASCII). I don't know how this one is
>     configured as far as encoding goes, but it does have labels
>     indicating it was used at ERDA, Los Alamos Laboratory, an
>     apparently short-lived predecessor to the Department of Energy.
>      1. Image <https://teletype.net/imgs/frieden_flexo.jpg>
>  4. I have three frequency shift converters that I am not expecting to
>     put to use at this point. Not certain if they work. There are some
>     serious tubes in these.
>      1. Image 1 <https://teletype.net/imgs/army_cv116.jpg>
>      2. Image 2 <https://teletype.net/imgs/fscs.jpg>
>  5. Model 15 RO case.
>      1. Image <https://teletype.net/imgs/m15_ro_cover.jpg>
>
> 73,
> Jordan Spencer Cunningham
> teletype.net <https://teletype.net> | GreenKeys Search Engine: 
> teletype.net/gksearch <https://teletype.net/gksearch>
> SMS via teletype: 385-308-4898 | Email via teletype: tty at nerdology.org
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home:http://mailman.qth.net/mailman/listinfo/greenkeys
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:GreenKeys at mailman.qth.net
>
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool:https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive:http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive:http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:http://comcents.com/tty/greenkeyssearch.html
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html
> Message delivered tosean at rustyradios.org.uk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230917/cd566a5f/attachment.html>