[GreenKeys] LPR35 BRP code bars?

[John W9DDD]

I think part number 162763, reset bail is stuck in the reset position.

John, W9DDD


> On Jan 27, 2023, at 2:25 PM, W2HX <w2hx at w2hx.com> wrote:
> 
> More progress continues to be made! Thanks to John W9DDD and Nick K4NYW I have solved the electrical/motor issue and things progressing.
>  
> I have now connected the reperf into my loop and sent a tape through to test if the selector magnets and code bars(?) are functioning. It seems part of the character setup mechanism is working, but that set up doesn’t seem to be making it to the punches. Here is a short video of what is happening.
> https://youtu.be/Wyu9cAyw55o
>  
> any suggestions where to look are very much appreciated. This thing is reaaaallly complex!
>  
> Thanks all!
>  
>  
> 73 Eugene W2HX
> Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx/videos
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230127/f67389d4/attachment.html>