[GreenKeys] LPR35 BRP

Joe Duszyński joeduszynski1 at gmail.com
Thu Jan 26 04:20:09 EST 2023


Eric and W2HXEugene
In Eric's post he said he has a BRPE the photos from Eugene is an LPR
who's 3 digit code is BRP that is not a BRPE.

The  BRPE is a totally different punch it is electronically controlled
and timed and spits out tape at 100cps (1000 wpm).
https://www.navy-radio.com/manuals/tty/sales/BRPE_Brochure_1966.pdf
As an aside...The DRPE is even faster than the BRPE 200cps (2000wpm).
https://www.navy-radio.com/manuals/tty/sales/drpe-descr-6310.pdf

Both are stand alone boxes with large Tube or Transistor driven controls.

On Wed, Jan 25, 2023 at 8:53 PM Eric Moore <mooreericnyc at gmail.com> wrote:
>
> I found this and a few other URLs:
>
> https://archive.org/download/nrf_lpr61/lpr61_text.pdf
>
> LPR61 instead of LPR35, but looks similar.
>
> I thought maybe the control would be similar to my BRPE, but I think not.
>
> -Eric
>
>
> On Wed, Jan 25, 2023, 4:57 PM W2HX <w2hx at w2hx.com> wrote:
>>
>> Hi all,
>>
>>
>>
>> In my question to produce fully punched tape, I acquired this LPR35 BRP unit. I hope to replace the hanging chad unit in my ROTR. I have NOT yet installed this on the ROTR base, I’m just getting familiar with it first.
>>
>>
>>
>> https://w2hx.com/x/TTY/28-ROTR/LPR%2035%20BRP%20Full%20Chad%20Reperf/20230125_163630.jpg
>>
>> https://w2hx.com/x/TTY/28-ROTR/LPR%2035%20BRP%20Full%20Chad%20Reperf/20230111_175044.jpg
>>
>>
>>
>> It appears to have some modifications for tape feed out. Perhaps some automatic tape feed out control as might be evidenced by this solenoid. Remote? Interfering? Non-interfering?  Blank tape feed out?
>>
>> https://w2hx.com/x/TTY/28-ROTR/LPR%2035%20BRP%20Full%20Chad%20Reperf/20230125_163635.jpg
>>
>> However,  manually actuating the solenoid does pitifully little, I can’t imagine how this could do anything. Maybe once things get in motion through the motor, this will do more?
>>
>> My current ROTR’s LPR has a lever which I believe is manual LTRS feed out function.
>>
>>
>>
>> There is this hexagonal attachment on this shaft which seems to be possibly related
>>
>> https://w2hx.com/x/TTY/28-ROTR/LPR%2035%20BRP%20Full%20Chad%20Reperf/20230125_163641.jpg
>>
>> https://w2hx.com/x/TTY/28-ROTR/LPR%2035%20BRP%20Full%20Chad%20Reperf/20230122_192307.jpg
>>
>> https://w2hx.com/x/TTY/28-ROTR/LPR%2035%20BRP%20Full%20Chad%20Reperf/20230122_191140.jpg
>>
>>
>>
>> Now for the problem. As I picked up this unit with almost no force on it, this piece broke off.
>>
>> https://w2hx.com/x/TTY/28-ROTR/LPR%2035%20BRP%20Full%20Chad%20Reperf/20230125_163652.jpg
>>
>>
>>
>> There were two screws that attached it to the hexagonal shaft.
>>
>> https://w2hx.com/x/TTY/28-ROTR/LPR%2035%20BRP%20Full%20Chad%20Reperf/20230122_191148.jpg
>>
>>
>>
>> these two screws look like they sheared off, but I suspect they were previously broken and just sitting in the holes with some grease. I can’t see how what I did could shear two screws, but alas, here we are.
>>
>> https://w2hx.com/x/TTY/28-ROTR/LPR%2035%20BRP%20Full%20Chad%20Reperf/20230122_191218.jpg
>>
>>
>>
>> here is the rear of the shaft.
>>
>> https://w2hx.com/x/TTY/28-ROTR/LPR%2035%20BRP%20Full%20Chad%20Reperf/20230122_192249.jpg
>>
>>
>>
>> I plan to order replacement parts from Mr. RTTY but I wanted to understand what I’ve lost and what I’ll gain from replacement parts.
>>
>>
>>
>> Anyone familiar with this set up on the LPR35? What do I have? Once I replace the shaft, how do I actuate that solenoid? AC line voltage? Dc voltage?
>>
>>
>>
>> Any pointers greatly appreciated.
>>
>>
>>
>>
>>
>> 73 Eugene W2HX
>> Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx/videos
>>
>>
>>
>> ______________________________________________________________
>> GreenKeys mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:GreenKeys at mailman.qth.net
>>
>> >>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>> >>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>> >>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>> >>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to mooreericnyc at gmail.com
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> >>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
> >>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> >>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> >>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to joeduszynski1 at gmail.com


More information about the GreenKeys mailing list