[GreenKeys] [External] Model 33 parts

[Eric Moore]

Yeah, a 3d printed clip would make a lot of sense. I will add it to the
pile o' projects and see if I find a roundtuit :).

I have attached a photo of the panel. If I could find one more of those
buttons, I could try making a transparent sticker wirh the printing cleaned
up and removing the original damaged printing using acetone. Quite a
project, but if a replacement is not available from a parts machine it may
be my best option.

Thanks all,

-Eric



On Fri, Jan 20, 2023, 12:26 PM Gillian Webb <thaeli at magfest.org> wrote:

> I need to make a similar repair. Was considering using Sugru, or 3D
> printing a new version of the broken off bit and epoxying it in.
>
> Not sure when I will have time, but the 33 "Teletype" metal faceplate
> looks easy enough to make out of an aluminum sheet and the printing
> something that wouldn't be hard to clone with a laser cutter and some
> Cermark.
>
> That stamped radius edge on the modem blanking plate would be a pain
> though. I'd be inclined to mill it from bar stock and paint to spec if the
> original paint can still be sourced, but that gets a bit more pricey.
>
> - Gillian
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230120/78672ae5/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20230120_124547.jpg
Type: image/jpeg
Size: 622422 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230120/78672ae5/attachment-0001.jpg>