[GreenKeys] Relays

[John W9DDD]

Tom, I have the heat gun and got that suggestion and realized I had the gun about all the same time. 

I have the relay schematic.  It's the base that goes into the 28 LESU to hold the relay that I need the WD for.   The schematic in the LESU wiring diagram references the same part number as stamped on the base assembly.  However a couple of these bases I have don't seem to match.

I also found a specification which documents modification kits for these assemblies.  Unfortunately the WD it references, doesn't  seem to be available.  

In reality I probably needn't worry since the mission is to convert one of these to be a RS232 to loop converter.  I just figured a diagram would help me to minimize the changes needed as oppose gutting and starting from scratch.

John, W9DDD


> On Jan 19, 2023, at 6:16 PM, Tom Hunter <tomhenryhunter at gmail.com> wrote:
> 
> John,
> 
> If I need heat, I use a Harbor Freight heat gun. In lieu of that I would use a hair dryer.
> 
> Last week I posted a diagram of a 255A relay including connections to all 8 pins from the New RTTY Handbook.
> 
> If you like I can email it it to you.
> 
> Tom  N3CRK
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org