[GreenKeys] custom pin feed roll paper

[John, W9DDD]

What machine you going to use this in?  Reason I ask is the 28 is all 
geared up to have a box sitting behind the cabinet and feeding into a 
slot in the back.  I'd have to take a look to see if I can remove the 
plate (it kind of snaps out) and figure how to put a roll of paper in 
there short of finding the pieces that are normally in a friction feed 
printer and installing those.

---
----
You said "tomorrow" yesterday.

The above comments or recommendations are SWAG. Use at your own risk.
John, W9DDD

On 1/4/2023 2:40 PM, Keith Lueck wrote:
> Richard from Adorable Supply says that they can customize 8 1/2" rolls 
> to have sprocket holes if we order 10 cases (12 rolls per case).
> How many folks here would be interested?
>
> I think I'd only be interested in 6 rolls, tops, myself.  Also, I 
> don't have any idea of the cost yet.
>
> I'll also contact the YouTuber CuriousMarc b/c I know he has a 
> pin-feed 33 as well. He's a rich guy, and maybe he'll be interested in 
> a lot of paper...  lol
>
> Keith
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home:http://mailman.qth.net/mailman/listinfo/greenkeys
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:GreenKeys at mailman.qth.net
>
>>>>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html
> Message delivered tow9ddd at tapr.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230104/281d7b31/attachment.html>