[GreenKeys] [External] Re: Shifting Margins

[Daniel Jones]

I found that after I readjusted the margin I left it with the pawl sitting perfectly on top of one of the teeth.  I adjusted it the amount required to get the pawl to sit back in the groove and now all is well.  

Daniel

www.K6YIC.com
DJones at K6YIC.com
HH#11973

> On Feb 26, 2023, at 08:11, Jones, Douglas W <douglas-w-jones at uiowa.edu> wrote:
> 
> From: Daniel Jones [djones at k6yic.com] -- Sunday, February 26, 2023 9:05 AM
> 
>> I fixed the margin issue which was simple enough (it seems the adjustment slipped as the screws were not really tight when I adjusted it back) but I still need to work on this 1st character problem.
> 
> The margin adjustment and the first character adjustment are two different things.  That's because the ratchet that advances the carriage has nothing to do with the margin.  First, you set the margin, then after doing that, you adjust the ratchet so that the character at the margin is also at a detent position on the ratchet.
> 
>                  Doug
> <image0.jpeg>