[GreenKeys] Governed model 14 motor

[Jeffrey Golas]

You would need to know what frequency fork you need. You tap the fork and watch the black/white pattern through the slot on the fork, adjust the gov until the pattern remains still.

I think some people use an amazon tach nowadays if you sesrch the list I remember seeing posts about it a while back.

Jeff

> On Feb 19, 2023, at 9:04 PM, Eric Moore <mooreericnyc at gmail.com> wrote:
> 
> 
> Hello, I have a model 14 KTR that I have been working on.
> 
> I am looking for information on the governed motor it uses, picture attached.
> 
> I am told it used a tuning fork for adjustment? Does anyone have one of these, or a set of instructions?
> 
> Thank you for any help!
> 
> -Eric
> <20230219_164027.jpg>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jeffg at junknet.net