[GreenKeys] Building my own power supply

[scottjohnson1 at cox.net]

The transformer needs to be placed before the full wave bridge rectifier.  The second diode is not necessary, unless it was intended as part of the snubber circuit, in which case it would be reverse biased, shunted across the output.  

The input fuse should be somewhere around 2A, SB.

Regards,

Scott W7SVJ

 

From: greenkeys-bounces at mailman.qth.net <greenkeys-bounces at mailman.qth.net> On Behalf Of Windows XD
Sent: Saturday, August 12, 2023 20:10
To: greenkeys at mailman.qth.net
Subject: [GreenKeys] Building my own power supply

 

Dear Greenkeys community,

 

I'm trying to build my own power supply for my Teletype model 19, it needs 120-130VDC of power @ 830Ma. I'm working on a circuit for it, but I don't exactly know what I am doing because I've never done this before. Would you let me know if I am on the right track to building a switching power supply? 

P.S. I know it needs a snubber circuit somewhere and none of the actual switching circuitry is there, I don't know enough to know what goes where.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230813/b92476ef/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 7557 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230813/b92476ef/attachment.png>