[GreenKeys] Model 14 keyboard adjustment

[Jeffrey Golas]

Correct me if Im wrong but could just be "dirty"; as the cam rubs against the switch youre seeing noise like a dirty volume pot.

Id use some alcohol and a business card and scrub the contacts (plus Im not sure thats even a terrible signal for a 1940s device. Going machine to machine I dont think that tiny bit of leakage woulda mattered.

Again, correct if wrong, Im here learning too.

Jeff KC3GJX

> On Aug 5, 2023, at 8:17 PM, Eric Moore <mooreericnyc at gmail.com> wrote:
> 
> 
> Hello all!
> 
> I am working on my 14s keyboard. I have attached a photo and a trace from my scope. 
> 
> It looks like it is bouncing? Any ideas how to improve the signal? This is R, so 01010
> 
> Thank you for any help! I have my printer kinda working, I am going to use the keyboard to dial in the timing on the governed motor.
> 
> -Eric
> <20230805_190327.jpg>
> <20230721_121647.jpg>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jeffg at junknet.net