[GreenKeys] Kleinschmidt TT-4C/TG and TT-76 printing 100wpm

[kn7sfz]

Splendid presentation!!!

kn7sfz


On 10/13/2022 5:45 AM, Kevin H. Phillips wrote:
> Below are links to two videos I took this past Sunday when I had a 
> chance to hook up the TT-4 and TT-76 to the ITTY 100wpm channel for an 
> extended time.  I have really only lubricated them (very, very well) 
> and adjusted the motor speeds a little.  They haven't needed any other 
> works as far as I know now.  I need to replace the ribbon on the 
> TT-4.  The ribbon feed was not working properly and I did discover 
> that the feeler arm was binding in the ribbon holder.  I ended up 
> trying to bend it out a bit and that solved the problem.  If the 
> holder seems "off" a bit compared to the other one then that is why.  
> It is the only "easy" way I could think of to solve that problem.
>
>
> 73
>
> Kevin
>
> W5TTY
>
> https://www.youtube.com/watch?v=SHK13Ahtp3A
>
>
> https://www.youtube.com/watch?v=nENB1JgVfoE
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20221013/43e87654/attachment.html>