[GreenKeys] Hammer rubbers (Teletype 33 etc)

[dave.g4ugm at gmail.com]

Tomas,

Don’t they have a lip to retain them? Hard to 3d print.

Dave

 

From: greenkeys-bounces at mailman.qth.net <greenkeys-bounces at mailman.qth.net> On Behalf Of Tomas Larsson
Sent: 25 November 2022 22:07
To: WAYNE <teletypeparts at comcast.net>; greenkeys at mailman.qth.net; Tumey, David <davetumey at yahoo.com>
Subject: Re: [GreenKeys] Hammer rubbers (Teletype 33 etc)

 

Well, those were moulded, I’m thinking of 3D-printing, a lot cheaper

 

 

With best regards

Tomas Larsson

Borås

Sweden

 

Från: WAYNE <teletypeparts at comcast.net <mailto:teletypeparts at comcast.net> > 
Skickat: den 25 november 2022 23:01
Till: Tomas Larsson <Tomas at tlec.se <mailto:Tomas at tlec.se> >; greenkeys at mailman.qth.net <mailto:greenkeys at mailman.qth.net> ; Tumey, David <davetumey at yahoo.com <mailto:davetumey at yahoo.com> >
Ämne: Re: [GreenKeys] Hammer rubbers (Teletype 33 etc)

 

Tomas, 

 

Someone has already done that at considerable cost.  Its Dave Tumey in Florida.  All us 32/33 owners owe him a big thanks. 

 

You might contact him and get a few and help out if anyone else in Sweden ever needs 1 or 2 in future.  

 

davetumey at yahoo.com <mailto:davetumey at yahoo.com>  

 

Best regards and 73, 

 

Wayne 

KB1FDW 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20221126/c2e13360/attachment.html>