[GreenKeys] Model 33 now 'stuck'

[Troy Peterson]

No the distributor rotor is only spinning when I press a key. Right now the keyboard responds properly - I press a key, the distributor rotor spins once and stops and the keyboard is unlocked. The H plate is fine. I also checked the break key and that seems ok.

 

I'm hoping it's not an electrical issue, but I think that it might be since it was working but stopped suddenly. One of the components that was on the edge might have worked for a bit and then failed as old components sometimes do after being idle for a long time and then powered back on...

 

 

Troy
 

 
On 07/06/2022 19:40, WAYNE wrote:
 
 
 Troy, 
 
 
 
 
 
 Didnt read all the email.  If the distributor rotor is spinning all the time that is the issue.  Do the H plate adjustment for the kybd and then pursue what else could be causing it.   
 
 
 
 
 See pics. 
 
 
 
 
 Wayne 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20220607/3013fbd2/attachment.html>