[GreenKeys] Loop over IP

[Paul Wills (CKT&T)]

https://sites.google.com/site/morsekob/home

On 8/1/2022 5:14 PM, Harold Hallikainen via GreenKeys wrote:
> I think there is a method of doing Morse over the Internet for remote
> operation of transceivers, but I don't know how it is done. To do on/off
> keying instead of, possibly, baudot to ASCII conversion and then
> transmission over TCP, I'd probably transmit the time of each transition
> to mark and the time of each transition to space. This again could be sent
> over TCP or UDP.
>
> As far as audio, my DSP TU (https://w6iwi.org/rtty/DspTU/ ) uses 12 bits
> per sample at 8 kHz sample rate. The 12 bits per sample is because that's
> the size of the ADC on the chip. All calculations are then done as double
> precision floats. In general, I think 8 bit at 8 kHz would handle RTTY
> fine.
>
> Harold
> https://w6iwi.org
>
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pdwills at cedarknolltelephone.com