[GreenKeys] RTTY article in CQ

[John, W9DDD]

I managed to find your page on the M28 KSR.  I would recommend it to 
anyone just starting to get familiarized with their "new" M28. My 
experience with motors has been a little different.  Usually I find the 
leads from the base to the terminal strip cracked or so stiff it's only 
a matter of time before doing so.

You definitely want that 3rd wire ground power cord.  I have a stock of 
extra PC power cords that I keep on hand.  Cut off the IEC connector and 
use them to replace the cord on just about anything I restore.

---
----
The above comments or recommendations are SWAG. Use at your own risk.
John, W9DDD

On 4/13/2022 5:44 AM, Ethan Blanton via GreenKeys wrote:
> Daniel Jones wrote:
>> Interesting article in CQ about RTTY.  Has a couple of errors but it’s
>> good to see a conversation still happing about the old machines and
>> RTTY in general.
> My Teletype supposedly appears in that article, although I don't have
> a copy to verify.  (I'm also supposedly going to receive a copy.)
> Someone from CQ asked if some of my photos could be used.  I did not
> provide any technical information or other material.
>
> Ethan
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org