[GreenKeys] Fwd: i-Telex

[Henning Treumann]

Log in to www.telexforum.de and use our Google translate button.

Guess most of the translations will be understandable.

Yes, there are a few "clone" solutions with Raspi etc. available, based on
the i-Telex protocol
developed by Fred.  But I have to admit that they are not that much
supported by the
developers as the original system, developed by Fred.

Henning DF3OE
i-Telex 925302 etc.

www.i-telex.net
www.telexforum.de





Am Sa., 2. Apr. 2022 um 14:16 Uhr schrieb Andy KN4UCL <kn4ucl at gmail.com>:

> Hey folks, is there a novice's guide to i-telex build/configure that is in
> English that anyone ever put together ... for say an M32?
>
> Empahsis on the word "novice" 🙄😁😎
>
> cheers, Andy
>
>
> On Fri, Apr 1, 2022 at 12:20 PM Paul Heller <paul0926 at comcast.net> wrote:
>
>> This below comes from the expert. I-Telex can operate at all our standard
>> speeds. I don’t think Fred can post to Greenkeys, so I am sharing below
>> with you all what he wrote
>>
>> I learn something every day!
>>
>> i-Telex can be a lot of fun. I’ve had short messages back and forth (like
>> messaging on the phone), short chats and rag chews. The length of the
>> conversation is measured against the paper consumed, which is kind of cool.
>> It’s like RTTY with autostart and point to point and no radio needed, no
>> fade-outs, no interruptions.
>>
>> And a completely faithful recreation of the old Telex network down to
>> interface hardware signaling. Dial someone and have a conversation (type)
>> or leave a message. Software defined telex!
>>
>> You can even place an order for a real telegram to be mailed to a postal
>> address.
>>
>> Paul
>> W2TTY
>>
>> Begin forwarded message:
>>
>> *From:* Fred.Sonnenrein at gmx.de
>> *Date:* April 1, 2022 at 2:17:19 PM GMT+2
>> *To:* Paul Heller <paul0926 at comcast.net>
>> *Subject:* *Aw: Re: [GreenKeys] i-Telex*
>>
>> 
>> Dear all,
>>
>> as i have developed the i-Telex system i shall correct something:
>>
>> The interface board to the ethernet perform the serial-to-parallel
>> conversion of the 5 bits and vice versa. So the ethernet board is generally
>> capable of performing in any speed. To be precise, the speed must be an
>> integer fraction of 900, so speeds of 45 baud, 50 baud, 75 baud, 100 baud
>> and 150 baud are possible.
>>
>> The current software version even allows to switch the speed between the
>> mentioned valued depending on the actual connection.
>>
>> Best regards,
>>
>> Fred
>>
>>
>>
>> ______________________________________________________________
>> GreenKeys mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:GreenKeys at mailman.qth.net
>>
>> >>> Jordan Spencer Cunningham's GreenKeys Search Tool:
>> https://teletype.net/gksearch
>> >>> 2002-to-present greenkeys archive:
>> http://mailman.qth.net/pipermail/greenkeys/
>> >>> 1998-to-2001 greenkeys archive:
>> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>> >>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
>> http://comcents.com/tty/greenkeyssearch.html
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kn4ucl at gmail.com
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> >>> Jordan Spencer Cunningham's GreenKeys Search Tool:
> https://teletype.net/gksearch
> >>> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> >>> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> >>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to df3oe.henning at googlemail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20220402/ca2ab0e8/attachment.html>