[GreenKeys] Baud rate change

[Joe Duszyński]

The motor has an odd governor on it with an external box which also
supplies the loop current the unit does not plug directly into wall
voltage the wiring goes from the unit into that external box then it(the
box) plugs into 220v 50hz needless to say its not running at 50 baud its
running slightly faster because of the 60hz.

If I messed around with the governor and an oscilloscope I "COULD" probably
get it to run at 50 baud but the motor and that power box won't live a
happy life being fed 220v 60hz vs its native 220v 50hz eventually it will
overheat and BBQ.

I'd rather run it either on DC or 110VAC 60hz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20210901/2b6fa063/attachment.html>