[GreenKeys] 15 stop lever problem

[John]

OK, I did find that the 6955eccentric was sticky.  Once I loosened that 
up, I now have no stop because the 7007 trip plunger is also stuck in 
the tripped position.

I can't see any way to get that freed up without taking the 71829 range 
scale assembly off.  That doesn't seem too hard, but I'm concerned on 
how critical getting it back on is as far as alignment.  Seems like 
there's plenty of adjutment available due to slotted holes in the 71696 
range scale plate.


On 10/31/2021 8:15 PM, John wrote:
> I've run into a situation where the stop lever doesn't get in unlatched.
> Possibilities?
> Frozen part?
> Adjustment?
> Broken part?
> Weak spring?
>
> John, W9DDD
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to john-koster at tx.rr.com
>

-- 

John Koster
john-koster at tx.rr.com