[GreenKeys] Model 15 to a computer

[steve bennett]

 Jordan,
  Thanks for posting this. I did not realize through hole components were an option.Good to know.
-Steve
    On Tuesday, November 9, 2021, 12:37:59 AM EST, Jordan Spencer Cunningham <js at teletype.net> wrote:  
 
 See https://teletype.net/display/TEL/Volpe+USB+Interface+Board

I made a run of these Volpe boards back in 2019. Unfortunately my remaining few boards have been claimed-- I just need to get them out the door now. I should have doubled my initial order-- would have made the boards a little cheaper, and I'd still have a hundred lying around for those interested. I'd like to do another run sometime, but realistically I likely wouldn't get around to it until next summer or fall. There's nothing stopping anyone else from doing another run, though it can be a lot of work to handle orders and such and ensure all the components you're using are compatible and correct, and you're putting up a fair bit of financial capital, too. 

You can also assemble one using through-hole components. I assembled a couple of these before I did the manufactured run in a morning, and I'm probably pretty mediocre at soldering. I wanted to get notes down to help anyone interested in getting the right components for through-hole assembly, but that's another thing to which I haven't gotten around. Still, what I have written down is in the link above under the "Build Your Own" section.

Anyway, whenever I am able to do another run, you'll see an announcement on the list here. It's a good board-- been using these for 15s/19s since early 2018 now-- all the videos of my machines are leveraging some version of this board. They'll work for pretty much any other model that leverages current loops, too. I hope to be driving a number of 28s with these whenever I find time to start working on cleaning them up.

-
Jordan Spencer Cunningham
teletype.net | GreenKeys Search Engine: teletype.net/gksearch
SMS via teletype: 385-308-4898 | Email via teletype: tty at nerdology.org


On Tue, Nov 2, 2021, at 3:13 PM, chris johnson wrote:

It's my ultimate goal to hook up a model 15 to my weather PC (windows)...  ive seen some ideas on say rs232 interfaces where one has to build a board one I dont build boards next the plans ove seen use obsolete parts...  what's the best or easiest way to accomplish this... USB would be great...
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to js at teletype.net


______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to raleigh_ranger at yahoo.com  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20211109/7456c5ee/attachment.html>