[GreenKeys] Need some "drawings" on items in Model33 ASR

[tomas at tlec.se]

Hi John, no I don’t thinks so.

Actually, I was looking in the spare-parts list, to se if the hub was done
in any special way, that’s when I found those adaptors, however I obviously
don’t need them, so Ill go for a piece of pipe.

 

With best regards

Tomas Larsson

Borås Sweden

 

Från: john at toebes.com <john at toebes.com> 
Skickat: den 30 mars 2021 22:42
Till: tomas at tlec.se; GreenKeys at mailman.qth.net
Ämne: RE: [GreenKeys] Need some "drawings" on items in Model33 ASR

 

Is this what you are asking for?

 

https://cad.onshape.com/documents/debbba2925a167ad85461476/w/ce2487daaffd99c
0fbdff960/e/27715fe3df49726eee4106f7

 

 

*	John Toebes
*	Head Coach, FTC Team #2901 – Purple Gears – Cardinal Gibbons High
School

 

From: greenkeys-bounces at mailman.qth.net
<mailto:greenkeys-bounces at mailman.qth.net>
<greenkeys-bounces at mailman.qth.net
<mailto:greenkeys-bounces at mailman.qth.net> > On Behalf Of tomas at tlec.se
<mailto:tomas at tlec.se> 
Sent: Tuesday, March 30, 2021 4:10 PM
To: GreenKeys at mailman.qth.net <mailto:GreenKeys at mailman.qth.net> 
Subject: Re: [GreenKeys] Need some "drawings" on items in Model33 ASR

 

Obviously I need to explain a little bit more.

What I am looking for is the two Hub-halves that has spare part number
182935 and the spool 182918 (probably a piece of plastic pipe or so)

 

With best regards

Tomas Larsson

Borås Sweden

 

Från: greenkeys-bounces at mailman.qth.net
<mailto:greenkeys-bounces at mailman.qth.net>
<greenkeys-bounces at mailman.qth.net
<mailto:greenkeys-bounces at mailman.qth.net> > För tomas at tlec.se
<mailto:tomas at tlec.se> 
Skickat: den 30 mars 2021 20:09
Till: GreenKeys at mailman.qth.net <mailto:GreenKeys at mailman.qth.net> 
Ämne: [GreenKeys] Need some "drawings" on items in Model33 ASR

 

Dear group.

I need some final things, before I can assemble my 33ASR.

I am missing spool hub for the punch-tape, the Idea is to print it my self,
so if anyone could do a simple drawing and some photos on it, I would be
very grateful.

The same applies to the plastic thing on the Upstop mechanism, would be
happy if I can get some sort of simple drawing, so I can print it as well.

 

Does anyone know what color on the stand, RAL or something.

 

I suppose there should be some type of pipe between the punch and the
chadbox, anyone got a photo and size?

 

I will put all 3D files on thingiverse, for anyone to use in the future.

 

With best regards

Tomas Larsson

Borås Sweden

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20210330/0211c8ca/attachment.html>