[GreenKeys] WTB J.H. Bunnell Pen Register Tape Reel / Arm

[Jim Cooper]

You came up with that info quickly !! 

That looks sufficiently different from any 
Teletype hardware I've ever seen ...  

But if you are not concerned about making it 
exactly like an original, looks like if you could 
make an arm then you could put a tube on the 
end to fit thru the hole in the tape roll, and 
use metal rods to support the sides. 

If I come across anything similar, I'll let you know. 

Jim  w2jc 


On 21 Mar 2021 at 22:29, Joe Clanin wrote:

> Per Jim's suggestion,
> 
> The BSP for the pen register in question can be found here:
> http://etler.com/docs/BSP/incoming/DVD1/000/030/030-341-701_I4.pdf
> .
> 
> I am referring to the part marked
> "reel" in the diagram on the first
> page, and the curved arm that
> supports it. A photo of such a reel
> / arm assembly can be found here:
> http://www.jhbunnell.com/pix-pensound
> er.GIF
> <http://www.jhbunnell.com/pix-pensoun
> der.GIF> 
> 
> -Joe
> 
> On Sun, Mar 21, 2021 at 10:16 PM Jim Cooper <jim.w2jc at gmail.com>
> wrote:
> 
> > On 21 Mar 2021 at 21:38, Joe Clanin wrote:
> >
> > > I do not have a single tape reel or
> > > holding arm between them. Does
> > > anyone have one (or more) of these
> > > around, or a suggestion for an
> > > alternative solution?
> >
> > A picture or description of what they
> > should look like, or what size and how
> > are they mounted might be helpful for
> > those who might have something.
> >
> > w2jc
> >
> >
> >
>