[GreenKeys] Fake TTY/crypto equipment

John, W9DDD w9ddd at tapr.org
Wed Jun 30 16:11:22 EDT 2021


"just lie down until the  feeling goes away".....

If only I had done that a bout 3 years ago I'd have a lot less GA and BR 
colored stuff here.

You could hide a Raspberry Pi inside and have it actually perform some 
pseudo crypto like trick. (5 number groups?) Finally a use for the 
Synchronous Pulse Transmission feature.
---
----
The above comments or recommendations are SWAG. Use at your own risk.
John, W9DDD

On 6/30/2021 2:24 PM, Nick England wrote:
> I'd like to create a fake KW-7 crypto unit - these units 
> encrypted/decrypted teletype signals. I need a fake one because they 
> don't ever show up on eBay.
> Ha!
> http://jproc.ca/crypto/kw7.html
> https://www.cryptomuseum.com/crypto/usa/kw7/index.htm
> 
> I'm only concerned about the external appearance, not the internals.
> Unfortunately it isn't just a straight-sided box. As you can see, the 
> card reader (or plugboard) cover is bulbous. There are three "feet" 
> along the front edge.The top is also an oddly shaped piece. The rear is 
> also an oddly shaped casting but I probably wouldn't worry about it.
> https://www.cryptomuseum.com/crypto/usa/kw7/img/301798/127/full.jpg
> 
> A simple rack mount was just a standard sliding rack shelf like in this 
> KWX-11 rack:
> https://www.navy-radio.com/commsta/stockton/stockton-1307-03.JPG
> 
> There was also a more complex slide-out-and-tilt mount KWF-1
> https://www.navy-radio.com/ships/images/cv66-rcvr-1982.jpg
> 
> Have you seen the props in a furniture store that look like a TV or 
> stereo but are just painted vacuuformed plastic? That's what might work 
> and then I'd add some real switches and indicator lamps. I'd have to 
> make a wooden/foam mock-up to use as a mold.
> 
> Is this too crazy? Most importantly is there a better way to do this?
> Just 3D print a plugboard/card-reader cover and mount it on sheet metal?
> 
> If it is possible, I'd like to make more to donate to museum ships, etc. 
> that just have empty rack spaces where crypto equipment used to be.
> 
> All suggestions and ideas are welcome including "just lie down until the 
> feeling goes away".....
> 
> Cheers,
> Nick England K4NYW
> www.navy-radio.com <http://www.navy-radio.com>
> 
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org
> 


More information about the GreenKeys mailing list