[GreenKeys] Did Teletype make a mistake?

[John, W9DDD]

I can send a direct answer to this if anyone is interested.  Boils down 
to the usual case of insides didn't match the cabinet.

John, W9DDD

On 1/1/2021 8:37 PM, w9ddd at tapr.org wrote:
> 
> I was trouble shooting why the margin lamp wasn't working after removing modifications made for customer (FAA?).
> 
> After starting at the wrong end, assuming I goofed the mod removal, I finally determined the problem was missing wires in the keyboard.  Wires from the switch go up to the terminal strip that also has the motor leads.  Wires between that terminal strip and the 20 pin connector were missing.
> 
> Looked up the WD 4262 for the LK25.  Darn if it doesn't show margin switch wires there either, Intentional?  Maybe not.  It doesn't show wires from pins 12 & 13 to the motor leads either, but those are present in the keyboard.
> 
> Mentally an easy fix, physically not so much.  Won't be the official wire colors though.
> 
> John, W9DDD
> 
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org
>