[GreenKeys] Lessons learned while swapping LXDs

[John, W9DDD]

1. If you want to ring out the switch connections to test the cable you 
just made, use some bond paper to clean the contacts first because the 9 
volt battery in your Fluke 75 won't burn through the crud.

2. If you're trying to replace the top plates, you should have the main 
shaft clutch disengaged or the tape lid will act like it's jammed after 
putting it all back together.  I won't tell you how many times I took it 
apart to check things on the underside of the tape guide plate.  I will 
admit to at least once.

-- 
---
----
The above comments or recommendations are SWAG. Use at your own risk.
John, W9DDD