[GreenKeys] [External] Re: Please help ID connector

[Jones, Douglas W]

From: Jim Haynes [jhhaynes at earthlink.net] -- Monday, October 26, 2020 4:52 PM

> I certainly can't confirm or deny.  It looks like the same style of
> connector used for the V.35 interface, but probably not the same number

V.35 connectors are 4-rows of pins (and, incidentally, the same exact connector as used on some high-speed paper-tape readers and punches (Tally, for example, but not BRPE).  This connector is a 3-row connector.  I think the pins are this connector are the same pins as used on the V.35 connector, and the jack-screws are quite similar, except you can get both lefthand and righthand jack screws for that series of connectors.

These connectors can be disassembled, and with the right tools, the pins can be extracted and reused.  You can get new pins too.

          Doug Jones
          jones at cs.uiowa.edu