[GreenKeys] 28KSR question...

[Jeff G]

If you look at any of the videos on youtube under "CuriousMarc", he builds
some breakout boxes using standarding electrical boxes and old-school 2
port patch panels. Here at home I did something similar, but I have a 1/4"
male jack to binding post adapter, and then I have a 1/4" female-to-female
coupler to essentially let me connect to the 1/4" plug on the teletype.

Jeff KC3GJX

On Wed, May 13, 2020 at 10:17 AM Roy Morgan <k1lky68 at gmail.com> wrote:

> I can imagine the usefulness of a "break-out" box. A male-female pair of
> connectors to go between the ones on the teletype, and convenient, labeled,
> points for voltmeter or ohmmeter testing for each connector pin. Some such
> gadgets allowed for opening each wire with a switch or jumper.
>
> Roy Morgan
> K1LKY Western Mass
>
> > On May 13, 2020, at 10:02
> >
> > Yeah, I apologize, the first photo I attached last night wasn’t so good
> ;o … this one (attached) has a slightly better angle, where you can see the
> four bell wires from the stunk box, going to the unoccupied connector :) .
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> >>> Jordan Spencer Cunningham's GreenKeys Search Tool:
> https://teletype.net/gksearch
> >>> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> >>> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> >>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jeffg at junknet.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20200513/ec9ac41e/attachment.html>