[GreenKeys] Model 33 printer heads

Fri Mar 27 16:31:02 EDT 2020

Yes it did, and thats why I reacted

Quote

A couple of wheels are available for museums or educators who need them. Please contact me directly off list. These are direct casts from original wheels and do not contain the signature present in the 3d models.

No further details on the process will be provided, as it required a lot of advanced technique and my friend is not interested in writing a long detailed guide as would be required

End quote

My intention is to make them available to everyone at basicaly self cost price, I do not intend to make any money on this. However, if I am going to order more than that is sold, then I have to make profit.

Mvh

Tomas Larsson

Sweden

Från: Paul Heller <paul0926 at comcast.net> 
Skickat: den 27 mars 2020 21:17
Till: Eric Moore <mooreericnyc at gmail.com>
Kopia: tomas at tlec.se; Greenkeys <greenkeys at mailman.qth.net>
Ämne: Re: [GreenKeys] Model 33 printer heads

Your first post did make it out to the group. I saw it

Paul
W2TTY

ITTY:                                                HTTP://INTERNET-TTY.NET:8000/ITTY
ITTY100:            HTTP://INTERNET-TTY.NET:8010/ITTY100 <http://internet-tty.net:8040/EUROPE> 

AUTOSTART: HTTP://INTERNET-TTY.NET:8030/AUTOSTART
EUROPE:           HTTP://INTERNET-TTY.NET:8040/EUROPE

On Mar 27, 2020, at 2:15 PM, Eric Moore <mooreericnyc at gmail.com <mailto:mooreericnyc at gmail.com> > wrote:

Hello, I tried to send the message below to the list a couple of days ago but it didn't go through. Here it is again.

Hello, I am writing to let you all know that my friend made a 3d model of an asr 33 type wheel.

 <https://www.thingiverse.com/thing:4159598> https://www.thingiverse.com/thing:4159598 

 He used this to 3d print a high resolution model, and then created a mold from that print, cast a new wheel in jb weld, and that wheel was tested in an ASR 33 and it worked. The model is provided for anyone who wants to attempt casting a new wheel in jbweld or to use any other manufacturing process they think may work.

A couple of wheels are available for museums or educators who need them. Please contact me directly off list. These are direct casts from original wheels and do not contain the signature present in the 3d models.

No further details on the process will be provided, as it required a lot of advanced technique and my friend is not interested in writing a long detailed guide as would be required.

This model also allows for people to create new wheels with custom fonts, have fun!

On Fri, Mar 27, 2020, 14:21 <tomas at tlec.se <mailto:tomas at tlec.se> > wrote:

Well, I got the idea from that post, however, as i understood it, they used the 3D-print to make a cast,  subsequently casting in epoxy.

And I am using the stl-file from Thingiverse.

Mvh

Tomas Larsson

Sweden

Från: Jeffrey Golas <jeffg at junknet.net <mailto:jeffg at junknet.net> > 
Skickat: den 27 mars 2020 19:39
Till: tomas at tlec.se <mailto:tomas at tlec.se> 
Kopia: greenkeys at mailman.qth.net <mailto:greenkeys at mailman.qth.net> 
Ämne: Re: [GreenKeys] Model 33 printer heads

There is someone working on exactly this, if you search Thingiverse they have a test model there.

Jeff

On Mar 27, 2020, at 1:32 PM, tomas at tlec.se <mailto:tomas at tlec.se>  wrote:

Dear folks.

I am looking into, having a printerhead to my Model 33 3D-printed i steel, is there any interest to have some more printed out.

The guy I am talking to says that it should be doable to 3D-print it, obviously it means that one can have any type of Head, with any characterset made in this way.

Currently I have no Idea what the cost would be, but wil have an indication of price in the near future.

Mvh

Tomas Larsson

Sweden

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jeffg at junknet.net <mailto:jeffg at junknet.net> 

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net <mailto:GreenKeys at mailman.qth.net> 

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/ <http://mailman.qth.net/pipermail/greenkeys/1998-to-2001> 
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to mooreericnyc at gmail.com <mailto:mooreericnyc at gmail.com> 

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to paul0926 at comcast.net <mailto:paul0926 at comcast.net> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20200327/143eabea/attachment.html>