[GreenKeys] Model 33 printer heads

[Eric Moore]

Hello, I tried to send the message below to the list a couple of days ago
but it didn't go through. Here it is again.

Hello, I am writing to let you all know that my friend made a 3d model of
an asr 33 type wheel.

https://www.thingiverse.com/thing:4159598

 He used this to 3d print a high resolution model, and then created a mold
from that print, cast a new wheel in jb weld, and that wheel was tested in
an ASR 33 and it worked. The model is provided for anyone who wants to
attempt casting a new wheel in jbweld or to use any other manufacturing
process they think may work.

A couple of wheels are available for museums or educators who need them.
Please contact me directly off list. These are direct casts from original
wheels and do not contain the signature present in the 3d models.

No further details on the process will be provided, as it required a lot of
advanced technique and my friend is not interested in writing a long
detailed guide as would be required.

This model also allows for people to create new wheels with custom fonts,
have fun!


On Fri, Mar 27, 2020, 14:21 <tomas at tlec.se> wrote:

> Well, I got the idea from that post, however, as i understood it, they
> used the 3D-print to make a cast,  subsequently casting in epoxy.
>
> And I am using the stl-file from Thingiverse.
>
>
>
>
>
> Mvh
>
> Tomas Larsson
>
> Sweden
>
>
>
> *Från:* Jeffrey Golas <jeffg at junknet.net>
> *Skickat:* den 27 mars 2020 19:39
> *Till:* tomas at tlec.se
> *Kopia:* greenkeys at mailman.qth.net
> *Ämne:* Re: [GreenKeys] Model 33 printer heads
>
>
>
> There is someone working on exactly this, if you search Thingiverse they
> have a test model there.
>
>
>
> Jeff
>
>
>
> On Mar 27, 2020, at 1:32 PM, tomas at tlec.se wrote:
>
> 
>
> Dear folks.
>
> I am looking into, having a printerhead to my Model 33 3D-printed i steel,
> is there any interest to have some more printed out.
>
> The guy I am talking to says that it should be doable to 3D-print it,
> obviously it means that one can have any type of Head, with any
> characterset made in this way.
>
> Currently I have no Idea what the cost would be, but wil have an
> indication of price in the near future.
>
>
>
> Mvh
>
> Tomas Larsson
>
> Sweden
>
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net <GreenKeys at mailman.qth.net>
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jeffg at junknet.net
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 <http://mailman.qth.net/pipermail/greenkeys/1998-to-2001>
> greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mooreericnyc at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20200327/bdb85a6e/attachment.html>