[GreenKeys] M28 ASR Gear

[Sam Stinson]

If you can get it 3D printed in Nylon it will be extremely strong, I have no doubts that it would hold up. I have printed small parts in nylon, you cannot easily damage them even with pliers and a hammer. 

> On Mar 13, 2020, at 14:21, William Wuttke <wcwuttke at att.net> wrote:
> 
> All,
> 
> I sent this out awhile ago in hopes that someone had the p/n 195157 gear. No one had one. I checked a few places to see if I could get the gear made. The lowest price I found was $425.00. That’s more than I paid for the whole machine.
> 
> 1. Does anyone have a ‘spare’ 3-speed modification kit they’re willing to part with?
> 2. Does anyone know of a place that can make the gear cheaper?
> 
> My brother suggested that I could 3D print it, but I don’t think it would hold up.
> 
> So far, the original gear is holding up without any further damage.
> 
> (Luckily, I have a backup set of 60 wpm gears in case of catastrophic failure.)
> 
> Thanks,
> Bill
> KE3BK
> 
>> 
>> All,
>> 
>> I’m in the process of cleaning, lubricating, repairing, etc., my newfound M28 ASR and found a gear that is still operating, but I don’t know for how long. It has a couple of damaged teeth. Does anyone have a p/n 195157, gear 49T, gray nylon or know of any place that makes custom gears? Paul Cembura doesn’t have any in stock.
>> 
>> Thanks,
>> Bill
>> KE3BK
>> <IMG_0741 3.jpeg>
>> 
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to samstinson at gmail.com