[GreenKeys] Switch question...

[Scott Johnson]

Yes, copper or aluminum.

Scott V. Johnson W7SVJ
5111 E. Sharon Dr.
Scottsdale, AZ 85254-3636
H (602) 953-5779
C (480) 550-2358
scottjohnson1 at cox.net
scott.johnson at ieee.org

-----Original Message-----
From: greenkeys-bounces at mailman.qth.net <greenkeys-bounces at mailman.qth.net> On Behalf Of E.
Sent: Saturday, June 6, 2020 3:27 PM
To: Robert Downs via GreenKeys <greenkeys at mailman.qth.net>
Subject: [GreenKeys] Switch question...


Hi all,

So I got a Hubbell switch - an oldie bakelite switch, to use with my 19 table.  On the side, it says “Use only devices marked CO/ALR with aluminum wire”.  Huh?  From what I understand, this should be safe with copper wiring, right?

Thanks much in advance!
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: 
>>> https://teletype.net/gksearch 2002-to-present greenkeys archive: 
>>> http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: 
>>> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: 
>>> http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to scottjohnson1 at cox.net