[GreenKeys] 28 ASR Typing Reperforator Print Hammer Replacement

[w9ddd at tapr.org]

Interesting.  The ones I have do have the hole off center, but don't have the  mitered corners on what I suspect is the business end like in your pictures.

John, W9DDD


> On Jan 3, 2020, at 3:42 PM, Nick England <navy.radio at gmail.com> wrote:
> 
> Ahhh - I knew I had been through this exercise before - here are photos plus a readme with installation notes
> http://www.navy-radio.com/tty/lpr-hammer/
> 
> Nick
> 
> Note from Don House -
> The rectangular hole is very close to the center but slightly lower on the improved version that has the dished out top. The rectangular hole on the older print hammer heads was in the center.
> 
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20200103/8b6ef213/attachment.html>